NAXJA Forums -::- North American XJ Association  

Go Back   NAXJA Forums -::- North American XJ Association > Land Use / Off Topic and other Forums > Jeep Picture Showcase
HOME Member FAQ Sponsor Info Rules Bylaws E-Mail

Jeep Picture Showcase Just a place to post (show off) your Jeep or your modifications images.

Reply
 
Thread Tools Rating: Thread Rating: 306 votes, 4.97 average. Display Modes
  #46  
Old January 7th, 2005, 09:24
DrMoab's Avatar
DrMoab DrMoab is offline
NAXJA Forum User
 
Join Date: Mar 2003
Location: The Utah Backwater
Posts: 23,376
Re: Reader's Rig's

Quote:
Originally Posted by sidriptide
thats the question of the week my friend!!! at the very least i will have the new DD on an RE 3.5" lift... rig plans have changed since i started the moab trip planning.. i am expecting a friend to have a 2-rig trailer so if i get a trail rig together it will get a ride out there... the plan is "evolving" on a daily basis... i got 3 months to get a new trail rig and lift it... if it werent for the last minute.. i'd never have time to get anything done...
Well if you want us to drag you up Pritchet you better have some good under armor!
Reply With Quote
  #47  
Old January 7th, 2005, 09:45
01-XJ's Avatar
01-XJ 01-XJ is offline
NAXJA Forum User
 
Join Date: Nov 2004
Location: Canterbury, CT
Posts: 112
Re: Reader's Rig's

Quote:
Originally Posted by Ludakris
ok, not good at posting pics on here, so how bout a link...
89' 2dr xj, about 4" lift, front spacers, sometime of HD springs, rear pack made with S-10 and stock leaves, 2" recievers front and rear, Homemade snorkel (not pictured), 34" LTB's, open axles, Scout II D44 in garage, hacked fenders, YJ flares, some trail clearancing.. front diff guard, mopar T/C and Gas tank skids.


http://members.cardomain.com/ludakris04
Here Ya Go



Reply With Quote
  #48  
Old January 7th, 2005, 09:52
Ludakris's Avatar
Ludakris Ludakris is offline
NAXJA Forum User
 
Join Date: May 2004
Location: Frederick, Maryland
Posts: 998
Re: Reader's Rig's

Thanks, guess you're smarter than I ......
Reply With Quote
  #49  
Old January 8th, 2005, 20:07
GSequoia's Avatar
GSequoia GSequoia is offline
Everyone says I'm a jerk.
 
Join Date: Feb 2003
Location: Torrance, CA
Posts: 20,955
Re: Reader's Rig's


Specs and more pictures in sig line.
__________________
President & SoCal Chapter President
'89 Laredo • '96 Country • WFW WWU?
Adopt-A-Trail keeps trails open - Have you volunteered this month?
Quote:
Originally Posted by Bent
Us normal people...
Reply With Quote
  #50  
Old January 8th, 2005, 20:46
1989laredoxj 1989laredoxj is offline
NAXJA Forum User
 
Join Date: Aug 2004
Location: Massachusetts
Posts: 332
Re: Reader's Rig's

I see that you have open axles but what about drive shaft and what gears are you running 34s are pretty big.


Quote:
Originally Posted by Ludakris
ok, not good at posting pics on here, so how bout a link...
89' 2dr xj, about 4" lift, front spacers, sometime of HD springs, rear pack made with S-10 and stock leaves, 2" recievers front and rear, Homemade snorkel (not pictured), 34" LTB's, open axles, Scout II D44 in garage, hacked fenders, YJ flares, some trail clearancing.. front diff guard, mopar T/C and Gas tank skids.


http://members.cardomain.com/ludakris04
Reply With Quote
  #51  
Old January 8th, 2005, 21:28
XJ89JEEP's Avatar
XJ89JEEP XJ89JEEP is offline
NAXJA Forum User
 
Join Date: Dec 2004
Location: Seattle, WA
Posts: 142
Re: Reader's Rig's

Quote:
Originally Posted by hackedxj
96 XJ 3.5" & 4" lift on 33", running a Dewalt sawzall with a filed trigger and Pachmayr grips


this is defenetly one of the best lookin XJ's i have ever seen.
Reply With Quote
  #52  
Old January 9th, 2005, 15:00
a_hiatt a_hiatt is offline
NAXJA Forum User
 
Join Date: Jul 2004
Location: effingham, IL
Posts: 237
Re: Reader's Rig's

4.5" lift. Custom Stinger bumper. Yakima rack. 33x10.50 tsl's. bit of stereo and electronic mods.

pretty

flexy
Reply With Quote
  #53  
Old January 10th, 2005, 00:52
jpfreak jpfreak is offline
NAXJA Member #1208
 
Join Date: Jan 2004
Location: Las Vegas
Posts: 168
Re: Reader's Rig's

Quote:
Originally Posted by hackedxj
96 XJ 3.5" & 4" lift on 33", running a Dewalt sawzall with a filed trigger and Pachmayr grips


Man that is a beautiful job with the flares, and I always liked that burnt orange type color, on just about any vehicle.
Reply With Quote
  #54  
Old January 10th, 2005, 13:58
Ludakris's Avatar
Ludakris Ludakris is offline
NAXJA Forum User
 
Join Date: May 2004
Location: Frederick, Maryland
Posts: 998
Re: Reader's Rig's

Quote:
Originally Posted by 1989laredoxj
I see that you have open axles but what about drive shaft and what gears are you running 34s are pretty big.

Axles and drive shafts are all stock.. .3.55's. They are 34's but measure at 33.6 new, so they arent a true 34". I will change gears when I dump the D35, and get newer shafts for the front.. so far I cant say that the 3.55's feel all that bad, I figure when I get 4.88's or so, it will be apparent how much they suck. I may have some vibes in the driveline, but its hard to notice with bias-ply swampers...
Reply With Quote
  #55  
Old January 10th, 2005, 16:06
bshaw's Avatar
bshaw bshaw is offline
NAXJA Forum User
 
Join Date: Jun 2004
Location: Nerk Hia
Posts: 1,188
Re: Reader's Rig's

here's some links to my heep: http://community.webshots.com/album/192457458CpyGxb

http://community.webshots.com/album/153117940ZnIREv
Reply With Quote
  #56  
Old January 10th, 2005, 16:10
XJ89JEEP's Avatar
XJ89JEEP XJ89JEEP is offline
NAXJA Forum User
 
Join Date: Dec 2004
Location: Seattle, WA
Posts: 142
Re: Reader's Rig's

what are the specs?
Reply With Quote
  #57  
Old January 10th, 2005, 16:46
karstic's Avatar
karstic karstic is offline
NAXJA Member
 
Join Date: May 2003
Location: Milwaukee
Posts: 8,659
Re: Reader's Rig's



1992 4 door 4wd Sport
Dana 30 front 4.88 gears
Dana 44 rear 4.88 gears, Detroit locker
AW4 Transmission
Hayden transmission cooler
NP231 Transfer case
33x12.5x15 BFG MT’s on Crager Soft 8 wheels 15x8 4” BS
Rancho coils-front
OME bastardized leafs-rear
Doetsch Tech shocks-front and rear
Mopar gas tank and t-case skid
Homebrew rocker bars
Tomken Rear bumper with 2” receiver and homebrew tire carrier
Custom 4x4 front tow hooks and brackets
M.O.R.E. Bombproof motor mounts
Cobra CB w/ 2’ Firestick Antenna
Garmin eTrex Vista GPSr
Hella 500 driving lights
Hella reverse lights
Yakima MegaWarrior Cargo Rack
__________________
Over 800 hours volunteered in the SBNF since 2008.
Mike Armstrong, "He was born a jerk."
Reply With Quote
  #58  
Old January 10th, 2005, 16:59
Lore5's Avatar
Lore5 Lore5 is offline
NAXJA Forum User
 
Join Date: Nov 2004
Location: Walnut Creek, California
Posts: 423
Re: Reader's Rig's

Quote:
Originally Posted by karstic
How much lift is that?
Reply With Quote
  #59  
Old January 10th, 2005, 17:19
bshaw's Avatar
bshaw bshaw is offline
NAXJA Forum User
 
Join Date: Jun 2004
Location: Nerk Hia
Posts: 1,188
Re: Reader's Rig's

Quote:
Originally Posted by XJ89JEEP
what are the specs?
opps...... 95 Country, 4.0L HO, 242, auto , D30 & 8.25 open,
All installed with my hands .
-3.5 RE supflex kit
-RE adj. track bar
-Rusty's .75 Pucks up front and .75 shackels in the rear
-Tom Woods SYE w/CV d-shaft
-ES3000 Procomp shocks all round, BPE's in the rear
-Rusy's tow hook kit for the front
-Class III Reese hitch w/ Warn insert and D ring
-BFG MT's 31" 10.50 w/ black rock crawlers
-homebrew deep water air intake
-CATZ HO hi/low fog lights
-almost finished OBA, using old A/C compressor
-sound system (kenwood exlon, mtx amp/speakers), w/ alarm system
-no longer a DD, much more to come, that's for sure........

Bout it.

Last edited by bshaw; January 10th, 2005 at 17:46.
Reply With Quote
  #60  
Old January 10th, 2005, 17:20
karstic's Avatar
karstic karstic is offline
NAXJA Member
 
Join Date: May 2003
Location: Milwaukee
Posts: 8,659
Re: Reader's Rig's

Quote:
Originally Posted by Lore5
How much lift is that?
~3". Right now the front is sitting low. I just got a set of 4" Terraflex coils for the front. ASA I get a set of Adj LCA's i'll bring the front up a little more. The rear bumpstops are set to stop compression before the springs over compress. I have to finish trimming the rear wheel openings. Once that's done, I'll remount the stock flares.
__________________
Over 800 hours volunteered in the SBNF since 2008.
Mike Armstrong, "He was born a jerk."
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Spy Photos Led Modified Tech Discussion 28 February 11th, 2008 12:43
Braided stainless brake lines for lifted rigs jode NAXJA Vendors Info and Feedback Forum 0 September 14th, 2004 09:52
Those with 91+ parts rigs BrianG Wanted: Private Party Only 0 February 12th, 2004 00:02
'Wheeling in South Dakota seanR Non-Tech / Off Topic 65 October 26th, 2003 07:26


All times are GMT -7. The time now is 05:50.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
NAXJA and NAXJA logo's Copyright NAXJA. All content/images Copyright NAXJA 1999-2014