NAXJA Forums -::- North American XJ Association  

Go Back   NAXJA Forums -::- North American XJ Association > NAXJA Events > NACFest 2020
HOME Member FAQ Sponsor Info Rules Bylaws E-Mail

NACFest 2020 June 18th - 21th, 2019 at Rausch Creek Off Road Park, Tremont, PA

Reply
 
Thread Tools Rate Thread Display Modes
  #1  
Old February 17th, 2020, 19:59
xcalibur223's Avatar
xcalibur223 xcalibur223 is offline
NAC VP
 
Join Date: Jan 2006
Location: long branch, nj
Posts: 1,867
The to do list

Pickup new tow rig!!!
Buy/borrow/rent/steal a trailer
Oil change
redo alignment
install new leaf springs
install hood vents
install hood pins
install speed bleeders on all 4 calipers and bleed brakes
install new injectors
install throttle body

Hardest part is going to be a trailer
__________________
Quote:
Originally Posted by Begster View Post
(And don't listen to a big red head who looks like hellboy, and answers to the name Ross, he doesn't actually know what he is doing!)
Reply With Quote
  #2  
Old February 18th, 2020, 13:33
Rob Mayercik's Avatar
Rob Mayercik Rob Mayercik is offline
NAXJA Member #920
 
Join Date: Jun 2002
Location: NJ, U.S.A.
Posts: 2,404
Re: The to do list

Replace seat bases (action: take pictures of driver's side one to document the failure from RocktoberFest)
Rebuild/reinstall CB mic extension cable/fix CB issues New extension built, need to test yet and reinstall
Get pinion seal on front axle replaced
Replace tcase rear output seal
fluid changes (oil/trans/diffs/tcase)
__________________
1992 Cherokee Laredo: "A wonderful balance of grace and rust"
1984 Dodge Omni
2002 Volkswagen Jetta GLS TDI

Last edited by Rob Mayercik; April 14th, 2020 at 15:27. Reason: forgot tcase rear output seal
Reply With Quote
  #3  
Old February 18th, 2020, 15:54
STROKER's Avatar
STROKER STROKER is offline
<-- A Tribute
 
Join Date: May 2002
Location: in my own little world, jus' dunno where it's at
Posts: 1,523
Re: The to do list

Rear driveshaft...DONE
Shifters...Done
Put interior back in and install new seats...DONE
Radiator...DONE
Reinstall front bumper...DONE
Relocate battery, welp, that led into having to replace the cargo area sheet metal...UGH?!?!?!?, DONE
Rear shock mounts...DONE
Wiring...all in all DONE
S belt...found one and DONE
Reconnect steering lines...DONE
Gas tank skid...Done
Reinstall tcase skid
Fuel pump...Done
Rear brakes and bleed...DONE
Reinstall front ds..DONE.
Exhaust...DONE
new ac lines...DONE and charge the system
Reinstall hood and front clip...DONE
oh and inspection by April...not happening, at least not by April
Adjust shifter cables so engagement is better, because of new location...

I’m sure there is more that I’m forgetting...why am I building a new rig???

STROKER
__________________
When we wheelin w/4.6 STROKER Friend of Matt #17
.
RAUSCH CREEK
Xj in progress

Last edited by STROKER; May 3rd, 2020 at 16:10.
Reply With Quote
  #4  
Old February 18th, 2020, 16:21
Victor S.'s Avatar
Victor S. Victor S. is offline
NAXJA Member
 
Join Date: Dec 2007
Location: Marcus Hook Pa.
Posts: 504
Re: The to do list

My list is kinda short but time consuming
Figure out rough running/misfiring
Bump Stops (front and rear)
SYE and rear driveshaft DONE
Nut and Bolt the Jeep.

Last edited by Victor S.; March 1st, 2020 at 13:01.
Reply With Quote
  #5  
Old February 21st, 2020, 16:52
Victor S.'s Avatar
Victor S. Victor S. is offline
NAXJA Member
 
Join Date: Dec 2007
Location: Marcus Hook Pa.
Posts: 504
Re: The to do list

Quote:
Originally Posted by Victor S. View Post
My list is kinda short but time consuming
Figure out rough running/misfiring Not happening
Bump Stops (front and rear)
SYE and rear driveshaftDone
Nut and Bolt the Jeep.
My son just added:
Front and rear diff covers DONE
Upgrade the tie rod bar DONE
Upgrade the track bar Done
Lucky me!

Last edited by Victor S.; May 18th, 2020 at 15:22.
Reply With Quote
  #6  
Old March 5th, 2020, 07:36
chedisme's Avatar
chedisme chedisme is offline
NAXJA Member
 
Join Date: Dec 2007
Location: middletown, NY
Posts: 5,590
Re: The to do list

Set pinion angle and weld purchasing on rear axle
Grind all the TJ brackets off my Dana 30
Weld purchase onto Dana 30
Install Dana 30 lunch box locker and chromo shafts from my old 30
Drill the knuckles out on the new axle for my 1 ton steering.
Patch the crack in the frame
If I have time I'll address the rot at the rear shackle mount.
__________________
Pics Vids
Quote:
Originally Posted by sheepjeep View Post
he demonstrated how a helicopter works thats the real reason he didnt get the cop job
Reply With Quote
  #7  
Old March 16th, 2020, 13:31
RoyalXJ's Avatar
RoyalXJ RoyalXJ is offline
NAXJA Member
 
Join Date: Jul 2009
Location: West Deptford, NJ
Posts: 3,699
Re: The to do list

I knock one thing off then add 2 more. smh

-replace/rebuild all control arm joints DONE
-get new air oil separator for oba- DONE
- trim front fenders- DONE
-cut and fold rear quarters
-pick up some new tires- DONE
-new TB bracket, brace & 5.5 coils. DONE
-re build front driveshaft
-install tc skid DONE
-hydraulic assist
-install rock sliders DONE
-build new steering and track bar DONE
-install new bumper and winch
-rear shock hoops
__________________
99XJ 5.5", 3 link, Waggy 44s locked w/ 4:88s on 35s

Last edited by RoyalXJ; May 24th, 2020 at 11:42.
Reply With Quote
  #8  
Old April 4th, 2020, 16:39
xcalibur223's Avatar
xcalibur223 xcalibur223 is offline
NAC VP
 
Join Date: Jan 2006
Location: long branch, nj
Posts: 1,867
Re: The to do list

Quote:
Originally Posted by xcalibur223 View Post
Pickup new tow rig!!! DONE
Buy/borrow/rent/steal a trailer
Oil change
redo alignment
install new leaf springs
install hood vents
install hood pins
install speed bleeders on all 4 calipers and bleed brakes
install new injectors DONE
install throttle body DONE

Hardest part is going to be a trailer
__________________
Quote:
Originally Posted by Begster View Post
(And don't listen to a big red head who looks like hellboy, and answers to the name Ross, he doesn't actually know what he is doing!)
Reply With Quote
  #9  
Old May 2nd, 2020, 12:29
xcalibur223's Avatar
xcalibur223 xcalibur223 is offline
NAC VP
 
Join Date: Jan 2006
Location: long branch, nj
Posts: 1,867
Re: The to do list

Quote:
Originally Posted by xcalibur223 View Post
Pickup new tow rig!!!DONE
Buy/borrow/rent/steal a trailer
new upper control arm
redo alignment
install new leaf springs DONE
install hood vents
install hood pins DONE
install speed bleeders on all 4 calipers and bleed brakes DONE
install new injectors DONE
install throttle body DONE
coolant flush DONE

Hardest part is going to be a trailer
Hood vents will probably get done after NAC fest. Just waiting on some parts to build a new upper than align everything. Most likely going to try to rent a car trailer for the weekend unless anyone has one I can borrow or I can find a really good deal on one.
__________________
Quote:
Originally Posted by Begster View Post
(And don't listen to a big red head who looks like hellboy, and answers to the name Ross, he doesn't actually know what he is doing!)
Reply With Quote
  #10  
Old May 3rd, 2020, 16:12
STROKER's Avatar
STROKER STROKER is offline
<-- A Tribute
 
Join Date: May 2002
Location: in my own little world, jus' dunno where it's at
Posts: 1,523
Re: The to do list

Quote:
Originally Posted by STROKER View Post
Rear driveshaft...DONE
Shifters...Done
Put interior back in and install new seats...DONE
Radiator...DONE
Reinstall front bumper...DONE
Relocate battery, welp, that led into having to replace the cargo area sheet metal...UGH?!?!?!?, DONE
Rear shock mounts...DONE
Wiring...all in all DONE
S belt...found one and DONE
Reconnect steering lines...DONE
Gas tank skid...Done
Reinstall tcase skid
Fuel pump...Done
Rear brakes and bleed...DONE
Reinstall front ds order new rear ds and install...DONE.
Exhaust...DONE
new ac lines...DONE and charge the system
Reinstall hood and front clip...DONE
oh and inspection by April...not happening, at least not by April
Adjust shifter cables so engagement is better, because of new location...

I’m sure there is more that I’m forgetting...why am I building a new rig???

STROKER
Actually took it for a test drive Saturday, drives like hell but it made it to the gas station and back...WOOHOO
__________________
When we wheelin w/4.6 STROKER Friend of Matt #17
.
RAUSCH CREEK
Xj in progress
Reply With Quote
  #11  
Old May 4th, 2020, 18:38
Rob Mayercik's Avatar
Rob Mayercik Rob Mayercik is offline
NAXJA Member #920
 
Join Date: Jun 2002
Location: NJ, U.S.A.
Posts: 2,404
Re: The to do list

Sweet!

Got my CB mic extension done a while back but haven't tested or installed it. Need to get going on those seat brackets, though, or the Jeep's not going anywhere...
__________________
1992 Cherokee Laredo: "A wonderful balance of grace and rust"
1984 Dodge Omni
2002 Volkswagen Jetta GLS TDI
Reply With Quote
  #12  
Old May 7th, 2020, 16:56
STROKER's Avatar
STROKER STROKER is offline
<-- A Tribute
 
Join Date: May 2002
Location: in my own little world, jus' dunno where it's at
Posts: 1,523
Re: The to do list

Hello all, Registration will be up in the next day or two, we are having NACFEST so come 1 come all.
With this comes strict regulations that we must and will follow at the park and probably the camp ground, so lets show our best when the time comes.

https://www.facebook.com/15024563586...3397187917344/

STROKER
__________________
When we wheelin w/4.6 STROKER Friend of Matt #17
.
RAUSCH CREEK
Xj in progress

Last edited by STROKER; May 7th, 2020 at 17:01.
Reply With Quote
  #13  
Old May 12th, 2020, 14:24
chedisme's Avatar
chedisme chedisme is offline
NAXJA Member
 
Join Date: Dec 2007
Location: middletown, NY
Posts: 5,590
Re: The to do list

Set pinion angle and weld purchasing on rear axle ---DONE
Grind all the TJ brackets off my Dana 30---DONE
Weld purchase onto Dana 30----DONE
Install Dana 30 lunch box locker and chromo shafts from my old 30--- HALF DONE
Drill the knuckles out on the new axle for my 1 ton steering---DONE
Patch the crack in the frame---- DONE
If I have time I'll address the rot at the rear shackle mount.---- HALF ASS DONE

JUST HAVE TO FILL THE REAR DIFF AGAIN, THE OLD OIL FELT TOO THIN.
__________________
Pics Vids
Quote:
Originally Posted by sheepjeep View Post
he demonstrated how a helicopter works thats the real reason he didnt get the cop job

Last edited by chedisme; Yesterday at 19:53.
Reply With Quote
  #14  
Old May 18th, 2020, 14:26
Rob Mayercik's Avatar
Rob Mayercik Rob Mayercik is offline
NAXJA Member #920
 
Join Date: Jun 2002
Location: NJ, U.S.A.
Posts: 2,404
Re: The to do list

Quote:
Originally Posted by Rob Mayercik View Post
Replace seat bases (action: take pictures of driver's side one to document the failure from RocktoberFest)
Rebuild/reinstall CB mic extension cable/fix CB issues New extension built, need to test yet and reinstall
Get pinion seal on front axle replaced
Replace tcase rear output seal
fluid changes (oil/trans/diffs/tcase)
Brackets have been cleaned up and coated in Eastwood Rust Encapsulator. Used Rustoleum rust remover gel (phosphoric acid) after hitting with wire wheel/flap wheel on dremel, it did a nice job. Even solvent-welded the crack in the tilt adjust lever (scored a tilting base for the driver' side).

Just have to get the driver's side one installed now. Anyone got a part number for the seat mounting studs for the 94-and-earlier seat mounts? The two front ones on my driver's side are pretty bad, not sure if they'll be usable. Open to bolts too, but would like recommendation as to bolt spec to use (grade 5? 8? 10.9?)
__________________
1992 Cherokee Laredo: "A wonderful balance of grace and rust"
1984 Dodge Omni
2002 Volkswagen Jetta GLS TDI
Reply With Quote
  #15  
Old May 25th, 2020, 12:36
STROKER's Avatar
STROKER STROKER is offline
<-- A Tribute
 
Join Date: May 2002
Location: in my own little world, jus' dunno where it's at
Posts: 1,523
Re: The to do list

Rear driveshaft...DONE
Shifters...Done
Put interior back in and install new seats...DONE
Radiator...DONE
Reinstall front bumper...DONE
Relocate battery, welp, that led into having to replace the cargo area sheet metal...UGH?!?!?!?, DONE
Rear shock mounts...DONE
Wiring...all in all DONE
S belt...found one and DONE
Reconnect steering lines...DONE
Gas tank skid...Done
Reinstall tcase skid...Done
Fuel pump...Done
Rear brakes and bleed...DONE
Reinstall front ds..DONE.
Exhaust...DONE
Reinstall hood and front clip...DONE
Adjust shifter cables so engagement is better, because of new location...Done
new ac lines...DONE and charge the system Has now turned into a new compressor because there was a leak and...yup the fitting on the compressor was cracked....

Other than that it is done for now and ready to be used


STROKER
__________________
When we wheelin w/4.6 STROKER Friend of Matt #17
.
RAUSCH CREEK
Xj in progress
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
To-do List MoparManiac NACFest 2014 144 June 26th, 2014 14:03
To-do List MoparManiac NACFest 2013 86 June 18th, 2013 20:16
Table Mesa Trail List (wish list) CrashSomers Arizona Rockfest 2010 15 March 22nd, 2010 18:22
Your 108 day to do list for NWF XJourney NorthWest Chapter 53 July 6th, 2005 05:15
to do list... funvtec OEM Tech Discussion 8 March 13th, 2005 07:36


All times are GMT -7. The time now is 04:59.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
NAXJA and NAXJA logo's Copyright NAXJA. All content/images Copyright NAXJA 1999-2014